No wireless network names SSID found. Check whether or not the DHCP function for the access point is enabled. Follow the on-screen instructions to make the connection status settings. Complete the additional steps in the wizard, and then click Finish. Devices on the same network can communicate with each other.

Uploader: Yozshut
Date Added: 21 April 2016
File Size: 9.36 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 60152
Price: Free* [*Free Regsitration Required]

i can’t connect my epson printer to my laptop by wifi.

You can follow the question or vote as helpful, but you cannot reply to this thread. In the Add Printer wizard, select Add a network, wireless or Bluetooth printer. If the link LED is off, try the following: If multiple keys are registered, check if you have entered the first key registered.

Confirm network name SSID.

Using EpsonNet Setup

If you have checked the above points, perform network setup using EpsonNet Setup. Follow the steps below to enable Epson Connect for your Epson printer in Windows: Print a Network Status Sheet and verify that the network settings are correct. Cannot print over the network. If you have used the WEP security mode for your access point to enable Shared authentication, confirm that both authentication key and index are correct. My approach now is to completely uninstall the printer driver and start again following the instructions from scratch.


EpsonNet Setup was unable to find my product on the network.

Connection using the EpsonNet Setup is available. Avoid placing the product next to a microwave oven, 2. Thanks for marking this epslnnet the answer.

Didn’t know if that made any difference. Check that the Wi-Fi communication mode set for your access point matches the one supported by your printer.

Other devices on the network are turned on The network address set manually for the printer is correct The network address for the printer is the same as the one for other devices If the network address is epsonet, set the correct address using the printer’s LCD panel.

In that case, the method for changing the printer connection differs from the following. If Windows can’t detect a printer that you want to use, follow these steps to find and add the printer manually: Join thousands of tech enthusiasts and participate.

i can’t connect my epson printer to my laptop by wifi. – Microsoft Community

The laptop will find the desktop and connect to the network intermittently, but then I’ll lose it and the printer will say offline. Launch EpsonNet Setup from the Start menu.

Try connecting to the wireless router or access point with your computer or another device to confirm that it is working correctly.

The IP address not only indicates the devices connected to the network such as PC, hub, and router but also the network range they belong to. Try connecting to another port on your router, access point, switch, or hub.


The security key password is necessary to connect to the network. Make sure the Ethernet cable is securely connected to both the product fond your router, access point, switch, or hub. I’m assuming I should install this on the laptop? So the issue is not my network, not drivers, but that Epson Connect Printer Setup program. The line between the network address and the host address differs according to the scale class of the network. If the filtering function is enabled, register your printer’s MAC address to prevent your printer from being filtered.

EpsonNet Print

Okay, so I managed to find the printer on the laptop and installed it. This message is displayed when the entered security key and the key set for your access point do not match. Also, when changing the wireless LAN connection, make a note of the broadband router access point and computer settings because you need the SSID and pprinter settings during setup.